英语翻译Desmountable galvanized floor grating,anti-slip type bolted to metallic profiles frame in correspondence of the pump room and of the side cofferdams.Dripping-pans under each motor with drainage to the oily bilge tank.Fuel and oily bilge t

英语翻译Desmountable galvanized floor grating,anti-slip type bolted to metallic profiles frame in correspondence of the pump room and of the side cofferdams.Dripping-pans under each motor with drainage to the oily bilge tank.Fuel and oily bilge t
英语翻译
Desmountable galvanized floor grating,anti-slip type bolted to metallic profiles
frame in correspondence of the pump room and of the side cofferdams.
Dripping-pans under each motor with drainage to the oily bilge tank.
Fuel and oily bilge tanks of structural type,with manholes,flanged
penetrations and dripping-pans with coaming shall be positioned in a raised
position to supply a slight positive head to the fuel feeding lines.
Pad eyes above all machineries for maintenance and debarkation.
Inside the pump room one shelving for storage and one working table with vice
shall be installed.
Ballast tanks equipped with sounding pipes of at least 2" diameter heading to a
recessed stainless steel/bronze terminal positioned on the deck at side.
Pipes schedule 80 for the pipes and for the penetrations (hot galvanized after
the prefabrication) with construction details such that the galvanization will
not be damaged by the installation.
Fuel tanks served by visual gauges of approved type by the Classification
Society for hydrocarbons.
Level gauges for ballast tanks shall be of capacitive type,with upper head in a
suitable box under the Main Deck,watertight,with bolted cover flush with the
deck.Electric wire from the box to the Pump Room shall be laid down inside a
metallic conduit,galvanized type and watertight.
Alternative type (air bubble) may be considered.
Oily bilge and sludge tank shall be arranged with sounding pipe in Pump Room
above grating with approved type valve and pedal for open/close.
Ballast manifolds shall be equipped with not immersed shut off valves
separating the system in three sections (port,centre and starboard) each one
separately connectable to the suction and delivery manifolds of each one of the
two pumps and to the sea chests.
Each manifold section will have a drainage valve with plug.

英语翻译Desmountable galvanized floor grating,anti-slip type bolted to metallic profiles frame in correspondence of the pump room and of the side cofferdams.Dripping-pans under each motor with drainage to the oily bilge tank.Fuel and oily bilge t
Dismountable galvanized floor grating,anti-slip type bolted to metallic profiles frame in correspondence of the pump room and of the side cofferdams.
在和泵房及边隔离舱对应的金属骨架上用螺栓固定防滑、可拆式的镀锌花铁板.
Dripping-pans under each motor with drainage to the oily bilge tank.
每个马达下面应布置集油盘并将放泄延伸至污油舱.
Fuel and oily bilge tanks of structural type,with manholes,flanged
penetrations and dripping-pans with coaming shall be positioned in a raised position to supply a slight positive head to the fuel feeding lines.
具有人孔、穿舱件为法兰式以及集油盘带围壁的油舱和污油舱应布置在一个抬升的位置以便给燃油供给管路提供一个略微的正压头.
Pad eyes above all machineries for maintenance and debarkation.
所有机械装置上都应布置眼板以方便维修和卸载.
Inside the pump room one shelving for storage and one working table with vice shall be installed.
在泵房内应布置一个用作储藏的架子和一个带老虎钳的工作台.
Ballast tanks equipped with sounding pipes of at least 2" diameter heading to a recessed stainless steel/bronze terminal positioned on the deck at side.
压载舱应配有直径至少为2"的测深管,凹陷的不锈钢/铜质管头布置在甲板舷侧.
Pipes schedule 80 for the pipes and for the penetrations (hot galvanized after the prefabrication) with construction details such that the galvanization will not be damaged by the installation.
管子及管子的穿舱件（在预制后经热态镀锌）的镀锌层在安装过程中不会被破坏.
Fuel tanks served by visual gauges of approved type by the Classification Society for hydrocarbons.
这句实在是不懂!
Level gauges for ballast tanks shall be of capacitive type,with upper head in a suitable box under the Main Deck,watertight,with bolted cover flush with the deck.Electric wire from the box to the Pump Room shall be laid down inside a metallic conduit,galvanized type and watertight.
压载舱的液位计应属电容型的,其上端应布置在主甲板下面的一个合适的水密箱子内,箱子的螺栓固定盖应与甲板齐平.箱子到泵房的电缆线应布置在一个水密的镀锌金属导管内.
Alternative type (air bubble) may be considered.
另外也可考虑其它形式的液位计,如气泡式.
Oily bilge and sludge tank shall be arranged with sounding pipe in Pump Room above grating with approved type valve and pedal for open/close.
布置在泵房的污油舱和油渣舱的测深管应高过泵房的花铁板并为其提供形式认可的阀件和供开/关的踏板.
Ballast manifolds shall be equipped with not immersed shut off valves separating the system in three sections (port,centre and starboard) each one separately connectable to the suction and delivery manifolds of each one of the two pumps and to the sea chests.Each manifold section will have a drainage valve with plug.
压载总管应配有不会被浸到的截止阀,截止阀将系统分割为独立的三段（左舷段、中部段和右舷段）,每个截止阀都可独立地与吸口相连并可将两台泵中的任何一台的总管（中的水）输送到海底门（通海吸水箱）.每个总管段应配一个带塞子的放泄阀.
注：你提供的英文有两处明显的错误,第一处是第一个单词；第二处是not immersed shut off valve应该是non immersible

Desmountable在泵房的书信镀锌了地板滤栅，防滑的类型被闩上对金属外形框架和旁边浮桥坞。
水滴平底锅在每个马达之下与排水设备对油腻的舱底坦克。
燃料和结构类型油腻的舱底坦克，与出入孔，安装了边缘渗透，并且水滴平底锅与栏板在一个被上升的位置将被安置提供一个轻微的正面头给燃料哺养的线。
填塞眼睛高于一切机器为维护和上岸。
在泵房一里面搁置为存贮和一个工作...

全部展开

Desmountable在泵房的书信镀锌了地板滤栅，防滑的类型被闩上对金属外形框架和旁边浮桥坞。
水滴平底锅在每个马达之下与排水设备对油腻的舱底坦克。
燃料和结构类型油腻的舱底坦克，与出入孔，安装了边缘渗透，并且水滴平底锅与栏板在一个被上升的位置将被安置提供一个轻微的正面头给燃料哺养的线。
填塞眼睛高于一切机器为维护和上岸。
在泵房一里面搁置为存贮和一个工作表与恶习将安装。
用听起来管子装备的压载水柜至少2" 朝向到一个被隐藏的不锈钢或古铜终端的直径安置在甲板在边。
管子预定80于管子，并且为渗透(在预铸以后被镀锌的热)与建筑详述这样电镀不会被设施损坏。
汽油箱由批准的类型视觉测量仪服务由分类社会为碳氢化合物。
水准仪为压载水柜将是电容类型，与上部头在一个适当的箱子在主甲板之下，水密，与被闩上的盖子注满以甲板。 电导线从箱子到泵房将放下在金属输送管道里面，被镀锌的类型和水密。
供选择的类型(气泡)也许被考虑。
油腻的舱底和烂泥坦克在泵房将安排与听起来管子在磨碎与批准的类型阀门和脚蹬之上为开放或接近。
石碴多头管在三个部分(口岸、中心和右舷)的将装备没被浸没的被关闭的阀门分离系统分开每一个可连接到每一个的吸和交付多头管二个泵浦和对海兵贮备箱。
每个繁多部分将有一个排水设备阀门与插座。

收起